by NenadEM NenadEM

Modular building pharmacy shop clinic Winterthur

EUROmodul provide customised pharmacy for clinic Winterthur as modular building assambled of bespoke containers installed on steel profiles structure.Modular building dimensions 15m x 11,2m (168m2) is perform of custom made EUROSTANDARD container 7,4m x 2,45n within thermal insulation PU120mm.

Electrical installations are made in accordance with Swiss regulations and standards.Interior lighting consists of LED ceiling lights with hidden electrical cable installations. Heating and cooling is performed by inverter air conditioners while outter AC units are installed on EUROmodul AC steel – powdercoated handlers.. Emergency lighting for the safety exits are derived in accordance with regulations in the event of a power failure.

Interior building ceiling is equipped with gypsum board noise reduction system, while windows are equipped with automatic electric driven blinds up to 3-level position + rain and wind radio controlled sensors.

Railings are made of stainless steel AISI 304, stairs and platforms ( width 1200mm ) are derived of hot galvanized steel segments and screws connected.

Modular building secundary roof is made of 8 segments, connected and sealed on location above containers. Above platforms are installed corugated zinced steel shelters for protection of weather conditions.

EUROmodul is one of the few manufacturers that provides individual production of modular buildings and containers to customers according their wishes, in accordance with modern requirements of the market.EUROmodul proved it’s know-how and high standards of design, engineering and manufacturing of prefabricated buildings which are made upon client specification. Installation of pharmacy modular building – facility was a challenge, one of a variety of projects that we have manufactured and installed in the last 27 years of production.

by NenadEM NenadEM

Prefabricated building for offices of Swiss REGA

For the headquaters office of interventions service REGA Switzerland, we have designed and produced a special steel construction which we assembled as tailor made facility measuring 11 m x 8.6 m composed of EUROmodul EUROSTANDARD containers on two levels layed on zinced steel construction.

The insulation of prefabricated object REGA mounted near mountain Mollis / Glarus was performed according to Swiss standards of construction: exterior walls made with thermally insulated panel with thickness PU120mm, while the inner walls are covered with plaster board 2 x 12.5 mm in white color. Balcony doors and windows are made of EUROmodul PREMIUM aluminum profiles with interrupted thermal bridge and glass with thermal conductivity K = 1.3 W / m2K.

Fire-resistant prefabricated building was carried out according to standard EI30, which refers to the floor of the facility as well as the side walls of the ground floor and first floor.

Fire walls are appropriately designed walls that impede or limit the spread of fire to other parts of the building.

Electrical installation of prefabricated building was carried out in accordance with Swiss requirements with automatic sensor management of LED lighting.

Within the building from the rear we installed a hot galvanized steel platform that connects EUROmodul sanitary container to other elements of assembly. Sanitary container is equipped with a high-class sanitary equipment (toilet bowl, sink, shower) with concealed installations.

The kitchen is made of custom made customer requirements with a built-in kitchen appliances for food preparation.

Railings, stairs and platforms are made of hot galvanized steel segments and screwed on site installed on prefabricated containers.

EUROmodul many times proved it’s know-how and high standards of design and manufacture of prefabricated buildings which is made at request upon customer specification. Installation of facility REGA was a big challenge, one of a variety of projects that we have manufactured and installed in the last 27 years of production.

by NenadEM NenadEM

Modular building for KIA MOTORS Switzerland

EUROmodul designed, manufactured and installed custom made prefabricated building size 127m2 consisting of 8 pcs. EUROSTANDARD container modules with dimension. 6m x 2.43m, Thermically insulated with PU120mm for purposes of KIA MOTORS showroom – KIA Switzerland.

Modular building consists of aluminum thermal bridge profiles with triple glazing mutually in VSG (safety glass) with electronic self-closing panic set and controlled entrance. The windows are made from PVC, with external blinds and manual controls.

Electroinstallation is made in accordance with local Swiss regulations and standards.Interior lighting consists of LED ceiling lights with hidden electrical cable installations. Heating and cooling is performed by inverter air conditioners while outter units are fitted inside the building facades. Emergency lighting for the safety outputs is derived in accordance with regulations in the event of a power failure.

  • Modular building  is equipped with sanitary unit; toilet bowl, inbuilt watertank, sink, water heater and hidden water inlet and outlet installations – plumbing.

Since the objects are used as showrooms space for cars, the floor load is as high as 500kg/m2, with glass surfaces of 2,0 x 2,5 m that rapresent basic feature needed for this custom project. One module is equipped with garage doors for vehicle entrance. On the rooftop si prepared construction for advertising and a shelter in front of the entrance which is 5,0 x 1,0 m large.

Object complex is positioned on existing parking lot where the levelling is made with recycled rubber inserts.

EUROmodul is one of the few manufacturers that provides individual production of modular buildings and containers to customers according their wishes, in accordance with modern requirements of the market.

by NenadEM NenadEM

Energy Efficient modular building for BioFamily Swiss

EUROmodul engineer, manufacture and installed energy efficient PREMIUM prefabricated modular building 15m x 7,4m for the known client in Switzerland assambled of five low-power modules within a production facility for the office purposes. Energy Efficient modular building is manufactured according to exacting Swiss building standards. The energy efficient modules are mounted in one piece – modular building on a raised platform made of reinforced concrete pillars and steel structure

EUROmodul energy efficient prefabricated buildings are manufacturing according to the energy efficiency requirements and specifications of the client – the country where the modular building or module will be installed.

Thermal insulation of modular building BioFamily Swiss is made of the mineral wool 200mm in accordance with EUROmodul PREMIUM prefabrication standard. Outter facades are made of powder-coated galvanized metal sheet known as EUROmodul BASIC option,  while interior walls are covered with gypsum panels painted in white. Double walls and noise barriers allow the smooth operation of the employees inside the building.

Entrance doors are manufactured of EUROmodul PREMIUM ALU profiles with thermal bridge and fire resistance class F30 + windows of PVC with thermal bridge and double glass chamber with thermal conductivity K = 1.1.

  •   Prefabricated building – fire resistance class F30!
by NenadEM NenadEM

Container complex IKEA Switzerland

We have designed, manufactured and installed for one of the largest and best-known retail chains in the world – IKEA in Switzerland, a complex of 38 container buildings custom made in accordance with the requirements and specifications of the client. The buildings consist of ground and first floor with two pairs of stairs. The main staircase is situated in the complex, covered, closed and isolated, while the second, rear staircase, open from outside.

The ground floor consists of 19 containers, each of which has dimensions of 6.0 x 3.0 meters.
The first floor also comprises of 19 containers of dimensions 6.0 x 3.0 meters.

  • The complex consists of sanitary spaces, technical rooms, meeting rooms and related facilities mutually connected spaces.

The production made in a production factory of EUROmodul in Croatia, transport and installation (extraordinary transport with accompanied escort) was carried out with assembly on site. Installation was particularly demanding and involved engagement of special crane with high power and long distance crane.

Equipment of modular facility consists of aluminum doors with triple glazing mutually in VSG (safety glass) with electronic self-closing panic set and controlled entrance. The windows are made from PVC, with external blinds and manual controls.

All wiring is made in accordance with local Swiss regulations and standards.

Facilities have air-conditioners with inverters.

The lighting consists of LED ceiling lights in all rooms. Emergency lighting for the safety outputs is derived in accordance with regulations in the event of a power failure.

by NenadEM NenadEM

Modular building – classrooms for children with special needs

EUROmodul designed, manufactured and installed for the client from Basel, Switzerland an prefabricated object – school with dimensions 15m x 6m, which consists of two classrooms for children with special needs. Facility is made of custom-made containers with customized low-energy construction PREMIUM modules.

The set consists of 5 modules which have length of 6,0m; width of 3,0m and an external height of 2,85m. Facilities are oversized and from the factory to the site we therefore organised oversize transport. EUROmodul is one of the few manufacturers that allows its customers to optimize at their maximum the facilities according to their wishes, which often means making facility of larger dimensions and better insulating material than the competition, which often can not or does not want to change their standard construction dimensions or methods of doing based on modern demands and wishes of the clients.

Container modules were merged on location in complex which makes prefabricated building next to the existing building. The essential we are making concrete pylons with the design grid for the required capacity of the facility for leveling with existing concrete elevated platform from which the classroom can be entered.

In every classroom are wall-mounted wiring for inlet and drain for the accompanying sanitary equipment; sink, fawcets of hot and cold water, water boiler and other elements. Containers are equipped with PREMIUM wiring according to standards and certification of the Swiss market. Interior of rooms are equipped with ECO converter air conditioners 2.5kW with split system (heating + cooling).

Requested fire walls between classrooms, corridors and toilets, for 30 minutes postpone prescribed fire upon requirements, and also address the application of noise reduction prescribed for school. Fire roads are signaled with emergency lighting, and the front door is installed with panic lock. Fire protection is emphasized by the door (EI30). EUROmodul incorporates quality materials that are characterized by satisfying at least minimal legal standards as well as our many years of know-how, studies and research. In order to meet customer requirements for low-energy certification, we have modified the structure of EUROSTANDARD container for mounting thermoinsulating PU panel thickness of 120 mm in the coated sections of gypsum (KNAUF) panels and three-layer PVC windows with heat transfer coefficient U = 1,0W / m2K.

by NenadEM NenadEM

Prefabricated building for the hospital in Switzerland

For the purposes of one of the most famous Swiss hospitals in St. Gallen, company EUROmodul has made it possible – designed, manufactured and installed a custom-made prefabricated building which has dimensions of 25,0 x 6,0 m consisting of containers with custom specification on demand. The inner consists of technical rooms, mini-kitchen and sanitary space. Because of the requirement and discretion of the client, the images of HI-TECH interior we can not publish.

In the middle of the building are located two toilets male / female equipped with EUROmodul sanitary equipment which includes toilets, concealed cisterns, basins, faucets, hot and cold water, LED lighting and sensors to save electricity.

At the entrance of the building is platform with railings and staircases made of hot galvanized steel. Above the landing set the marquee dimensions 25,0 x 2,0 m with associated construction and finishes.

With individual approach to the production of prefabricated building, EUROmodul meets the requirements of the clients in this case with the front door from reinforced aluminum profiles. Containers are fully equipped with premium electrical installations for high energy consumption according to standards and certification of the Swiss market.

In order to meet customer requirements for low-energy certification, we modified EUROSTANDARD construction container for mounting PU panels with thickness of 120 mm and three-layer PVC windows with heat transfer coefficient U = 1,0W / m2K.

by NenadEM NenadEM

Modular buildings complex for victims of domestic violence

EUROmodul has designed, manufactured and installed an complex that consists of 18 Eurostandard modules with thermal insulation classified as low-energy. External walls, floor and roof are made with PU panel 120mm (U = 0,18W / m2K), while the walls consist of Knauf system W112. Toilets and showers are made of HPL. The floors of sanitary facilities and laundry room are made from waterproof PVC.

The complex has a total dimensions of 22,0 x 13,1 meters with a canopy of 2,4 x 2,4 meters, which protects the front door from the weather. The central hall is set with left and right oriented rooms and toilets. The derived secondary roof has a slope of 2%.

The kitchen is fitted with all the equipment including wall hoods. The windows have a heat transfer coefficient U = 1,0W / m2K and external blinds as protection from the sun. Upon completion of the building it will be set up a secondary roof with gutter downspouts and storm water drainage.

Above the main entrance will be set up a  shelter with dimension 2,4 x 2,4m with polycarbonate and a controlled drainage of storm water through the pillars. One module serves as a technical room in which are included all installation, such as the installation of water, electricity, telephone and heating. The facility is included with emergency lighting.

by NenadEM NenadEM

Modular buildings for refugees in Germany – Container camps

EUROmodul engineered and manufactured modular buildings – container camps for refugees, assembled from container modules. Coloring schemes, materials and equipment as well as everything else was made upon request for demanding European norms (fireproofness, noise, static requests). EUROmodul provided organisation of transport and participated in the container modular building installation on location in Germany.

The European migrant crisis or European refugee crisis began in 2014, when a rising number of refugees and migrants made the journey to the European Union to seek asylum, travelling across the Mediterranean Sea or through Southeast Europe.

Many refugees are been settled in EUROmodul containers. The refugee settlement complexes are formed as 95% factory prepared and finished modules which are transported to location and just connected together. The complexes are formed of rooms – dormitories, kitchens, bedrooms, toilets. Toilet objects comes fully equipped with water and sewage installations, toilet bowls (cheramic or stainless steel dependant on individual project needs), pissoirs, mirrors, flush cabinets, showers, boilers, air – heating elements, electrical installations, etc.

Toilets, and the access to toilets and established sanitation standards, are actually a very, very important issue in much of the developing world. The World Health Organization (WHO) estimated in 2010 that 2.5 billion people worldwide didn’t have access to a toilet. The lack of toilets can lead to many serious sanitation problems; exposed fecal matter can lead to any number of a long list of diseases and can cause infection, lead to dysentery, and provided a breeding ground for many parasites.

  • EUROmodul toilet production quality enables established sanitation standards as well as satitsfying country specific as VDE electric installation element norms for Germany.

Hundreds of different toilet types have been produced for various purposes, delivered to various continents and various hygenic standards.
Modular building is manufactured with high class thermal insulation of walls, roof and floor which are made of PU panels and mineral wool. Customised container and modular building static calculation is provided in details as well as all other certificates requested by investor.

by NenadEM NenadEM

Prefabricated building – school in Switzerland

We designed and produced temporary prefabricated building made up of containers in a short time period for the temporary school in Switzerland. EUROSTANDARD containers are connected in a system to the whole building  with overall dimensions of 27m x 14,6m.

Stairs, railings and platforms are manufactured from hot galvanized steel segment in the factory and are connected on the site while we assembly the building. The inner room of prefabricated building will be used for classrooms, locker rooms and other school activities of students and professors.

Sanitary facilities were performed in accordance to EU DIN standard for a handicapped persons as male / female toilet cubicles. On the roof of the sanitary containers was carried out a terrace with a floor and a fence that is reachable through the central corridor. Containers are equipped with LED illumination to follow the requirements and regulations of the Swiss Energy Act. Heating is done with special high-efficiency air conditioners.

The building has a system of ‘turnkey’ with interior space previously defined by the client.